Today, I would like to share with you: What is the structure and sorting principle of the balance wheel sorting machine?

Sorting is a conveying device often used in modern logistics storage. When sorting goods, it is usually necessary to adjust the conveying direction ~ The balance wheel sorting machine is one of the logistics sorting equipment, which is composed of various devices. It changes the conveying direction through induction during sorting, and is suitable for the transportation of various products. Its characteristics are high speed, large-scale sorting and transportation, and low error rate in sorting, which not only improves sorting efficiency, but also reduces labor costs! Let's take a look at Suzhou Xingting Intelligent Technology Factory: the structure and sorting principle of the balance wheel sorting machine!

The balance sorting machine is mainly composed of conveying device (roller and balance sorting machine belt), synchronous steering controller, transmission device, frame, etc. During operation, according to the instructions and information identification issued by the management system, the steering controller changes the running direction of the conveying device, which can realize the left and right sorting of articles and convey the articles to the shunting conveyor. Because the belt of the balance wheel sorter installed on the conveying roller is of soft rubber structure, it can effectively avoid the damage to the surface of the conveyed articles when turning to sort, and the sorting is fast and accurate, and has no impact on the articles, so it is suitable for sorting fragile articles; Widely used in all kinds of logistics (distribution centers), all kinds of boxes, bags, trays, bottles, books, parcels, electronic products and so on!

The sorting principle of the skew wheel sorter is that the barcode on the goods is read by the automatic code scanner, and then the roller and the belt of the skew wheel sorter are designated to make corresponding actions according to the pre-programmed program of the barcode, so that the goods are sorted from the main line to the branch line at an angle of 0-90 degrees, and the sorting work of different goods is completed, so as to distinguish the distribution! Secondly, the skew wheel sorter can make any angle between 0-90 degrees, which can be used for product diversion, confluence, positioning, rotation, separation and transportation, interval control transportation, side transportation and other treatments. It is a sorting equipment that is widely used in logistics enterprises at present!