To maintain and maintain the cross belt of express logistics center, the following measures can be taken:

Step 1 clean regularly

-Clean the dust, sundries, dirt, etc. on the cross belt to prevent them from entering the equipment and causing wear or blockage.

-Clean the surface of the conveyor belt to ensure good friction and package transport stability.

2. Check the conveyor belt

-Check the conveyor belt regularly for wear, tear, deviation, etc.

-If there is a badly worn area, replace part or whole of the conveyor belt in time.

3. Lubricating parts

-Regularly lubricate the driving device, rollers, bearings and other moving parts to ensure their normal operation and reduce wear.

4. Fasten the connector

-Check and tighten all the connectors of the equipment, such as bolts and nuts, to prevent the looseness from causing equipment failure.

5. Electrical system inspection

-Regularly check whether the electrical lines are damaged, aged, and have poor contact.

-Test the performance of electrical control elements to ensure their normal operation.

6. Sensor detection

-Check and clean all kinds of sensors, such as position sensors and weight sensors, to ensure their sensing accuracy and accuracy.

7. Debugging of mechanical parts

-Adjust the mechanical parameters such as the parallelism of the rollers and the tension of the conveyor belt to make it in the best working condition.

8. Training operators

-Ensure that the operators are familiar with the correct operation methods and precautions of the equipment to avoid equipment damage due to improper operation.

9. Establish and maintain files

-Record the contents, time, problems found and treatment methods of each maintenance for subsequent reference and analysis.

10. Regular overhaul

-Carry out comprehensive overhaul and inspection on a regular basis and replace wearing parts according to the usage of equipment and the suggestions of manufacturers.

11. Environmental control

-Keep the operating environment of the equipment clean and dry, and avoid the adverse effects of temperature and humidity on the equipment.